top of page
20200818_100304.jpg

PLAYTEC JUMP products are the safest and most durable on the market. They also offer the best value for money.

TECHNICAL DETAILS
PLAYTEC JUMP

LOGOS AND
REGULATIONS

  • Logos  PLAYTEC.ca in a central position, on each side of the Playtec Jump,

  • Customer logos (on request), in the center or on the ends, see illustrations below,

  • Safety regulations around the Playtec Jump, see illustrations below.

EQUIPMENT
INCLUDED

  • Trampoline

  • Regulations panel (municipal aluminum)

  • 120V / 15A variable speed motor

  • List of materials required (if purchased without installation)

  • Installation guide (if purchased without installation)

  • 6 year warranty

  • Repair kit

PNG TRANSPARENT_PANNEAU RÈGLEMENTS PLAYTEC JUMP 24''X 36'' FRANÇAIS_QUÉBEC VERSION20201.pn

SAFETY AND
INSURANCE

  • Accepted by insurers.

  • Very conspicuous Playtec Jump regulations and safety writings panel.

  • Requires a minimum of 12 inches of shock-absorbing surface (cedar shavings or sifted and washed sand) all around the Playtec Jump (6' minimum), see plan below.

  • Peripheral fence recommended, but not mandatory, see plan below. 

IMPLANTATION ET INSTALLATION_35X50 ET 35X60_PLAYTEC JUMP_split_1-1.png

HOW
THAT WORKS

  • Playtec Jumps are permanently attached 3' below the ground surface.

  • A blower continuously pushes air to create an overpressure between the ground and the membrane of the Playtec Jump.

  • Customers can program the blower (start time and end time).  

  • The Playtec Jump inflate and deflate in 20 minutes.

  • The air is routed to the Playtec Jump through an SDR28 type pipe (non-perforated rigid drain). 

bottom of page